Flashy Build: Phase Five - Primed and Sanded

It's been a while since I've done an actual blog post, but here goes.

I've glued on the details, used wood-putty filler to fill in some gaps and holes, and done my best to sand down the rough parts.

I figured she was ready for her first coat of primer. 

And, with every prop build I've seen, she was also ready for her first round of "fill and sanding" that tends to come after every round of priming...

Here's the filling...

At this time, Flashy's just waiting for her next round of sanding and then priming, which will hopefully be today.

Closer and closer still...